International Symposium on Metastable and Nano Materials

27^th - 31^st August 2006, Warsaw, Poland

LIST OF POSTERS

Quantitative analysis of multiphase powders with nanocrystalline NiAl and FeAl phases by Rietveld method
G. Dercz, D. Oleszak, K. Prusik, L. Pajak

Structural studies of stress annealed Co₂₁Fe_64-xNb_xB₁₅ alloys 
S. N. Kane, S. S. Khinchi, Z. Gercsi, A. Gupta, L. K. Varga, F. Mazaleyrat

Structural and Chemical Characterization of Bimetallic Nanoparticles Pt_x-Pd_1-x Supported on Silica
N. Castillo, L. Díaz Barriga, R. Pérez

Search for propagating vibrational modes in the Ni₂B metallic glass 
G. F. Syrykh, A. S. Ivanov, J. A. Stride, Y. V. Lisichkin, N. A. Klimenko

Surface morphology of Fe₇₉Mo₈Cu₁B₁₂ ribbons characterised by atomic force microscopy
M. Pavúk, M. Miglierini, M. Vůjtek, R. Zbořil, M. Masláň, P. Svec

Anomalous temperature dependence of sound velocity in Zr₅₀Cu₄₀Al₁₀ with different excess free volume
T. Fukami, M. Fukatani, D. Okai, Y. Yokoyama, Y. Akeno, T. Yamasaki, A. Inoue

Developing Au-based Amorphous Alloys
G. Fiore, L. Battezzati

Electron transport properties of amorphous Ni-Zr-Ti-M (M = B, Nb, Sn, Si)
K. Pękała, D.Oleszak

Methods of evaluation of nanocrystalline fraction 
K. Pękała, P. Jaskiewicz, A. Grabias, J. Latuch

Al-U based amorphous alloys obtained by melt spinning method
É. Fazakas, L. K. Varga

Callibration of cooling rate for Al-based amorphous and nanocrystalline flakes prepared by a bottom-up melt spinning method
B. Varga, É. Fazakas, L. K. Varga

Thermal properties of amorphous Aluminum alloys by fast scanning rate DTA
P. Kamasa, É. Fazakas, L. K. Varga

Crystallization behavior of amorphous alloys in the Al-Ce-Ni system
C. Triveno Rios, S. Surinach, M. D. Baró, C. Bolfarini, W. J. Botta F., C. S. Kiminami

Study of crystallization process of Fe₆₅Nb₁₀B₂₅ and Fe₇₀Nb₁₀B₂₀ glassy metals
J. Torrens-Serra, P. Bruna, J. Rodríguez-Viejo, T. Pradell, M. T. Clavaguera-Mora

Devitrification of mechanically alloyed Zr-Ti-Nb-Cu-Ni-Al glassy powders studied by time-resolved X-ray diffraction.
S. Scudino, D. J. Sordelet, J. Eckert

Crystallization kinetics and viscosity of Cu₄₇Ti₃₃Zr₁₁Ni₈X₁ (X = Si, Sn) metallic glasses
L.-C. Zhang, M. Calin, M. Adam, J. Eckert

Crystal growth and time evolution for Zr₂Cu metallic glass and Zr₂Ni amorphous alloy
D. Okai, M. Asada, I. Noda, T. Fukami, T. Yamasaki, A. Inoue

The influence of the increasing copper addition on the properties of (NiCu)ZrTiAlSi amorphous alloys
T. Czeppe, A. Sypień, P. Ochin, C. Singh

Metastable phase formation from undercooled melt of REFeO₃ (RE: rare-earth element)
K. Kuribayashi, K. Nagashio

Isothermal study of the nanocrystallization kinetics of amorphous Fe₆₀Co₁₈Nb₆B₁₆ alloy 
J. S. Blázquez, M. Millán, C. F. Conde, A. Conde

Influence of Mn content on the microstructure and hyperfine parameters of amorphous and nanocrystalline Hitperm FeCoMnNbB alloys
H. Benaini, J. S. Blázquez, C. F. Conde, A. Conde, P. Ochin

Microstructure and magnetic properties of FeMoBCu alloys: influence of B content
C. F. Conde, J.S. Blázquez, V. Franco, A. Conde, P. Svec, D. Janičkovič

Magnetic ions mediated spin-dependent transport in quantum dots
P.C. Morais, F. Qu, O.O. Diniz Neto, N.O. Dantas, A. F. G. Monte

The iron-gold magnetic nanoparticles: the preparation, the characterization and the magnetic properties
A. Zeleňáková, J. Degmová, M. Kusý, J. Kováč, V. Zeleňák

Secondary Magnetic Anisotropy in Hitperms
B. Butvinová, P. Butvin, G. Vlasák, P. Svec, D. Janičkovič

The influence of heat treatment on magnetostriction of Fe₇₄Mo₈Cu₁B₁₇ metallic glass
G. Vlasák, P. Svec, T. Kaňuch, M. Pavúk, M. Miglierini

Magnetocaloric effect in amorphous and nanocrystalline FeCrNbBCu alloys
J. Kováč, P. Svec, I. Skorvánek

Mechanosynthesis of PZT from different lead oxides
G. Rivera-Ruedas, A. Hurtado Macías, J. M. Yáñez-Limón, A. Bolarín-Miró, E. Martínez-Franco, J. Muñoz-Saldaña

The magnetoelastic Villari effect in Fe₂₅Ni₅₅Si₁₀B₁₀ amorphous alloy subjected to thermal treatment
A. Bieńkowski, R. Szewczyk, J. Salach

Co added Finemet and Nanoperm alloys with flat hysteresis loops
R. Kolano, A. Kolano-Burian, L. K. Varga, J. Szynowski, M. Polak

Magnetic properties of Co doped Finemet at elevated temperature
A. Kolano-Burian, R. Kolano, T. Kulik, J. Ferenc

Induced transverse magnetic anisotropy and domain structure in Co doped Finemet
A. Kolano-Burian, R. Kolano, M. Kuzmiński, J. Szynowski, M. Steczkowska-Kempka

Changes In Structure, Hyperfine Fields and Magnetic Characteristics Induced by Ball Milling of Finemet
K. Brzózka, T. Szumiata, M. Gawroński, B. Górka, P. Kollár

Structure and magnetic properties of Fe_73.5-xV_xCu₁Nb₃Si_13.5B₉ alloys
P. Sovák, G. Pavlík, V. Kolesár, K. Saksl, J. Füzer

Structure and magnetic properties of Fe_73.5-xCe_xCu₁Nb₃Si_13.5B₉ alloys
G. Pavlík, P. Sovák, V. Kolesár, K. Saksl, Ján Füzer

X-ray diffraction, magnetization and Mössbauer studies of Ni-Fe alloys prepared by high-energy ball milling
D. Oleksáková, P. Kollár, J. Füzer, J. Dekan, M. Miglierini, S. Roth

The influence of composition on the properties of barium ferrite magnets obtained by glass devitrification
W. Kaszuwara, A. Witkowski, M. Leonowicz, R. Wróblewski, P. Pawlik

Effect of milling medium on the structure and magnetic properties of mechanically alloyed barium ferrite 
W. Kaszuwara, A. Witkowski, M. Leonowicz, P. Pawlik, J. Paszula

On the magnetic properties of bonded magnets made from a mixture of Nd-Fe-B and strontium ferrite or alnico powders
D. Plusa, M. Dospial, B. Slusarek, U. Kotlarczyk

The influence of nanomilling on the formation of Ba-hexaferrite 
G. Kakuk, A. Csanady, L. Trif, I. Sajó, K. Papp, A. Sztaniszlav, E. Kálmán

Magnetic properties of melt-spun nanocomposite FePtNbB ribbons 
N. Randrianantoandro, O. Crisan, A. D. Crisan, J.-M. Greneche

From substituted hydrotalcite-like anionic clays to nanopowders containing MgFe₂O₄ spinel ferrites with tailored magnetic properties
G. Carja, H. Chiriac, N. Lupu

Elastic properties and mechanical behavior of Fe-based and Co-based amorphous wires and microwires
H. Chiriac, V. Dobrea, N. Lupu

Elastic properties behaviour in metallic glasses
E. Pineda, D. Crespo

Thermal stability and hyperfine interactions of mechanically synthesized Co₄₀Fe₄₀Ni₂₀ alloy
T. Pikula, D. Oleszak, M. Pękała, J. K. Żurawicz, E Jartych

Residual Stresses and the Mechanical Properties of Metallic Glasses
Yi Zhang, A. L. Greer

SiC nano-ceramics sintered under high-pressure
A. Swiderska-Sroda, G. Kalisz, B. Palosz, N. Herlin-Boime

Quality of compaction of bulk nanocrystalline Al₇₃Si₁₉Ni₇Mm₁ alloys produced by various pressure
G. Cieslak, J. Latuch, T. Kulik

Finite element simulation for densification of a compact grain circular plate under hot pressing conditions
H. Camacho-Montes, L. E. Fuentes-Cobas, R. K. Bordia, M. E. Fuentes-Montero, P. E. Garcia-Casillas, C. A. Martinez-Perez

Photoacoustic investigation of maghemite-based BSA nanocomposite
L. B. Silveira, J. G. Santos, A. C. Oliveira, B. M. Lacava, A. C. Tedesco, P. C. Morais

Mössbauer investigation of maghemite-based BSA nanocomposite
J. G. Santos, L. B. Silveira, A. C. Oliveira, B. M. Lacava, A. C. Tedesco, P. C. Morais

Nanocrystalline nickel oxide films prepared by chemical vapor deposition
E. Magali Lazcano Ugalde, J. R. Vargas Garcia

Reciprocating micro-wear resistance of CuZrTiNi thin film
H. Joo, H. Choi, H. Cho, H. Jo

Radial dependence of deformation induced crystallization in amorphous Al₈₅Ce₈Ni₅Co₂ HPT-discs
P. Henits, Zs. Kovács, A. P. Zhilyaev, Á. Révész

Deformation induced crystallization in an amorphous Cu₆₀Zr₂₀Ti₂₀ alloy
S. Hóbor, Á. Révész, A. P. Zhilyaev, Zs. Kovács

Nanocrystallization process in amorphous alloys during severe plastic deformation and thermal treatments
Zs. Kovács, P. Henits, S. Hóbor, Á. Révész

Low Temperature Mechanical Properties and Failure Peculiarities of the Ti6Al4V ELI Ultra-fine Grained Alloy
E. Tabachnikova, V. Bengus, A. Podolskiy, S. Smirnov, K. Csach, J. Miskuf, L. Saitova, I Semenova

Physical modeling of microstructure development of aluminum and iron "Armco" during accumulative roll-bending process
A. Milenin, K. J. Kurzydłowski, M. Kwapisz, A. Drużycka-Wiencek, W. Spychalski, M. Knapiński

Mechanical and Acoustic Emission Behaviour Induced by Channel-Die Compression of Mg-Li Nanocrystalline Alloys Obtained by ECAP Technique
J. Kusnierz, A. Pawełek, Z. Ranachowski, A. Piątkowski, Z. Jasieński, S. Kúdela

Fatigue damage in nano-size grained oxygen free copper
S. Z. Han, M. Goto, C. Lim, C. J. Kim, S. Kim

Thermal Stability of Phase Transformation Products in Duplex Stainless Steel
W. W. Zhang, C. H. Shek, K. W. Wong, K. H. Lo, J. K. L. Lai

Development and Characterization of Nano-metal/ceramic Dispersed Water/E-glycol Based Nanofluid for Advanced Heat Transfer Applications
M. Chopkar, P. K. Das, I. Manna

Ionic glass conductor: SiO₂-Na₂CO₃-Al₂O₃-Li₂CO₃
C. E. A. Santos, E. M. Marmolejo, J. G. Santos, N. O. Dantas, P. C. Morais

Evaluation of Vegetal Starches as Preconsolidants and Open Porosity Promoters on Perovskite-Like Ceramics used as Cathodes in Solid Oxide Fuel Cells 
C. Cortés-Escobedo, V. Calderón-Cabrera, J. Munoz-Saldana

Experimental study on thermal conductivity of lubricant containing nanoparticles
C.-S. Jwo, L.-Y. Jeng, T.-P. Teng

Photodecomposition of NH₄OH using TiO₂ nanofluid
C.-S. Jwo, H. Chang, D.-M. Chen, J.-Z. Chen, M.-J. Kao 

Nano Hybrid TiO₂/Carbon Black Materials for Gas Sensing
W.-J. Liou, H.-M. Lin

Platinum-iridium nanoparticles dispersed on titania nanotubes
S. Capula Colindres, J. A. Toledo Antonio, J. R. Vargas Garcia, C. Angeles, M. A. Cortes

Morphology study of PVP-Pd nanoparticles prepared by ultrasonic irradiation of Pd(NO3)2 solution
A. Nemamcha, J. L. Rehspringer, H. Moumeni, and D. Khatmi

Preparation And Catalytic Properties Of Nanodispersed Ni-Me-Catalysts On The Base Ni-Skeletal Produced By Electrodeposition Method
N. A. Zakarina, G.V. Akulova, Ju. M. Arinkin

Density Functional Calculations of Adsorption of Palladium on CNT Surface
M. Gryciuk, H.-M. Lin, L. Stobinski, J. Gorecki

Influence of Biomolecules in the synthesis of Transition Oxides Nanostructures by a sol gel process
C. A. Martínez-Pérez, P. E. García Casillas, H. Camacho Montes, H. Monreal-Romero

The Preparation of Pt/MWCNTs Catalyst for Hydrodechlorination of CFC-12 Freon
K.-N. Lin, M. Bonarowska, L. Stobinski, Z. Karpinski, H.-M. Lin 

Microstructure and magnetic properties of commercial polymer composite with barium ferrite powder
R. Nowosielski, R. Babilas, G. Dercz, L. Pajak

Research of processes of sorption and diffusion in polyisoprene-carbon nanocomposite
G. Shakale, V. Teteris, I. Klemenoks, M. Knite

Structure and properties of magnetic nanoparticles processed by pyrolysis of polymers containing Co and Fe 
E. Sówka, M. Leonowicz, J. A. D. Pomogailo, G. I. Dzhardimalieva, J. Kazmierczak, A. Slawska-Waniewska, M. Kopcewicz

Mechanism of ultrasound-induced structural instability in bulk metallic glasses
T. Ichitsubo, E. Matsubara, J. Saida, H.S. Chen, N. Nishiyama, T. Yamamoto

Ultrahigh Fatigue Strength and the Mechanisms in Bulk Metallic Glasses 
K. Fujita, T. Hashimoto, W. Zhang, N. Nishiyama, C. Ma, H. Kimura, A. Inoue

Crystallization of Cu₅₄Ni₆Zr₂₂Ti₁₈ amorphous alloy during isothermal annealing in supercooled liquid region
E. S. Park, M. Y. Huh, J. H. Lee, H. J. Kim, J. C. Bae

Effect of matrix strength on the plastic behaviour of BMG/crystalline composites in supercooled liquid region
E. S. Park, M. Y. Huh, J. H. Lee, H. J. Kim, J. C. Bae 

Mechanical Properties of Cold Rolled Zr₅₀Cu₃₀Ni₁₀Al₁₀ Bulk Glassy Alloys 
Y. Yokoyama, T. Yamasaki, A. Inoue

Oxidation behaviour of a Cu-Zr-Al Bulk Metallic Glass
C. H. Shek, R. C. Y. Tam, W. H. Wang

Structural and vibrational properties of deposited Cu or Zr surface adlayers on Cu₄₆Zr₅₄ bulk metallic glass
D. G. Papageorgiou, A. Ibenskas, C. E. Lekka, G. A. Evangelakis

Microstructure and corrosion resistance of the bulk glassy Fe-Co-Zr-Mo-W-B alloys
G. Pawłowska, P. Pawlik, H. A. Davies, J. J. Wysłocki, H. Bala

Investigation of the cooling rate in the suction casting process 
P. Pawlik, K. Pawlik, A. Przybył

Formation of 20 mm-sized metallic glasses in La-based alloy system
Q. K. Jiang, G. Q. Zhang, L. Y. Chen, J. Z. Wu, H. G. Zhang, J. Z. Jiang

Stamping surface reliefs onto aluminium foils using re-usable BMG dies surface-structured in the T-range deltaT = T_x - T_g 
M. Aljerf, A. LeMoulec, J. P. Gabathuler, P. Deneuville, A. R. Yavari

Surface self-healing of metallic glasses in the supercooled liquid region deltaT = Tx - Tg
A. Moreira Jorge Jr., A. R. Yavari

Fe-(Cr, Mo)-(C, B)-Tm Bulk Metallic Glasses with High Strength and High Glass-Forming Ability
K. Amiya, A. Inoue

Crystallization Characteristics of Zr₆₅Al₁₀Ni₁₀Cu₁₅ Bulk Metallic Glass
H. G. Jeong, W. J. Kim, J. B. Lee, D. J. Yoon, S. J. Lim, S. Choi

Friction Welding of Cu-based Bulk Metallic Glasses and Welding Performance Evaluation
H.-S. Shin, H.-Y. Choi, Y.-J. Jeong, J.-H. Ahn, W. Zhang, A. Inoue

The origins of large room-temperature ductility of some bulk glassy alloys
D. V. Louzguine-Luzgin, Y. Zeng, A. Deny Heri Setyawan, H. Kato, N. Nishiyama, J. Saida, A. Inoue

Mechanical behaviour and phase formation of amorphous and partly crystalline Fe-based alloys 
U. Siegel, U. Kühn, K. Werniewicz, N. Mattern, B. Bartusch, L. Schultz

EXAFS and Dilatometric Analyses of Structural Rearrangement after Annealing in a Zr-based Bulk Metallic Glass
K. S. Lee, J. Eckert, Y. W. Chang

Formation and properties of new rare-earth-based bulk metallic glasses
S. Li, D. Q. Zhao, M. X. Pan, W. H. Wang

Acoustic mode Grüneisen and equation of state for bulk metallic glasses
R. J. Wang, B. Zhang, P. Wen, D. Q. Zhao, M. X. Pan, W. H. Wang

The tribological behavior of blended NiTiZrSiSn bulk metallic glass [BMG] matrix composite coating by APS
J. Cho, S. Y. Hwang, C. Lee

Design of Cu₈Zr₅-based bulk metallic glasses
L. Yang, J.H. Xia, Q. Wang, C. Dong, L.Y. Chen, X. Ou, J.F. Liu, J.Z. Jiang, K. Klementiev, K. Saksl, H. Franz, J.R. Schneider

Cu-based bulk metallic glass matrix composite prepared by spark plasma sintering
Y. C. Kim, J. H. Han, H. K. Seok, S. H. Han, J. K. Lee

In-flight CuZrTiNi particle energy tailoring in the kinetic spraying deposition
J. Kim, S. Yoon, H. Choi, H. Kim, H. Jo, C. Lee

On-line Nanoparticle Measurement Using Dynamic Light Scattering for Process Analysis and Optimization of Submerged Arc Nanoparticle Synthesis
L.-C. Chen, B.-H. Gin

Development of Nanoparticle Shape Measurement and Analysis for Process Characterization of TiO2 Nanoparticle Synthesis
L.-C. Chen, C.-C. Ho

Synthesis and magnetic properties of Ni nanoparticles 
H. Chang, M.-J. Kao, C.-S. Jwo, H.-T. Su

Synthesis and Characterization of ZnO Nanoparticles Having Hexagonal Crystal by a Novel Gas Condensation Process
H. Chang, M.-J. Kao, C.-S. Jwo, M.-H. Tsai

Synthesis and Material Properties of Ag/Ni Nanocomposite Fluid 
M.-J. Kao, H. Chang, Y.-H. Yeh

The metastable phases in Co₈₇B₁₃, Co₈₀B₂₀ and Co₆₀B₄₀ Alloys obtained by high energy ball milling 
L. M. Kubalova, V. I. Fadeeva, I. A. Sviridov 

The formation of perovskite-type phase in the system Ni-Al-C by Mechanical Alloying 
V. I. Fadeeva, V. K. Portnoy, A. V. Leonov, S. A. Fedotov

Experimental investigation and modeling of mechanical alloying process of Al-Mg, Al-Cu-Mg, Al-Cu-Mg-Zn composites and alloys 
A. Tikhomirov, A. Aksenov, S. Kaloshkin, E. Shelekhov 

Structure and properties of mechanically alloyed composite materials from hard-recycling scrap of Al alloys
M. Samoshina, A. Aksenov, E. Kaevitser

The formation process of a nanocrystalline FeMo solid solution prepared by mechanical alloying
H. Moumeni, A. Nemamcha, S. Alleg, J. M. Greneche

Reaction milled and spark plasma sintered Al-AlB2 composite materials
M. Kubota, M. Sugamata

Influence of soluble salt matrix on mechanochemical preparation of PbS nanoparticles 
M. Achimovičová, E. Godočíková, P. Baláz, J. Kováč, A. Satka

Mechanochemical reduction of antimony sulphide Sb₂S₃ with magnesium in a planetary mill 
E. Godočíková, P. Baláz, L. Takacs, J. Kováč, A. Satka, W. S. Choi

Nanocrystalline Ni₃Al alloy obtained by mechanical alloying and subsequent heating
A. Antolak, M. Krasnowski, T. Kulik

Amorphisation process during mechanical alloying of Al-Fe-Ti powders and crystallisation of the milling products
M. Krasnowski, T. Kulik

Syntheses of hydroxyapatite by various mechanochemical reactions 
K. Wieczorek-Ciurowa, K. Gamrat

Coating metals by surface mechanical attrition treatment
Á. Révész, L. Takacs

Formation of Cu-Zr-Ti-Sn amorphous powders by mechanical alloying technique
C.-J. Hu, H.-M. Wu, M.-Y. Chang

Formation of Co-M-Ti-B (M=Fe, Nb) amorphous powders by mechanical solid-state reaction
H.-M. Wu, C.-J. Hu, Y.-D. Cheng 

Microstructure and magnetic properties of a-Al₂O₃/Co nanocomposite powders prepared by ball milling
E. Menéndez, J. Sort, S. Surinach, J. Nogués, M. D. Baró 

Consolidation of Mechanically Milled Al-8Zn/Al₂O₃ Composite Powder
D. Hernandez-Silva, M. A. Garcia-Bernal, V. Sauce-Rangel

Phase transformation sequence during interaction mechanochemically synthesized solid solution with liquid eutectics
T. F. Grigoryeva, A. I. Ancharov, V. F. Pindyurin, A. P. Barinova, V. V. Boldyrev

Nanocomposites intermetallics / oxides, produced by MA SHS
N. Z. Lyakhov, P.A. Vityaz, T. F. Grigoryeva, T. L. Talako, A. P. Barinova, I. A. Vorsina, A. I. Letzko

Characterization of nanocrystalline lithium ferrite prepared by mechanochemical methods
I. Bergmann, V. Sepelák, A. Feldhoff, K. D. Becker

Study of the NiCoMo system mechanically alloyed 
A. Sagarzazu, G. Gonzalez , R. Villalba, J. Ochoa

Evolution of Amorphous/Nanocrystalline Microstructure in Al-based Ternary Alloys by Mechanical Alloying
I. Manna

Mechanical and Microstructural Characterization of Dispersion Strengthened Al-C Nanocomposites
A. Santos-Beltrán, V. Gallegos-Orozco, A. Díaz-Díaz, M. Miki-Yoshida, R. Martínez-Sánchez

Dispersion of Graphite Nanoparticles in a 6063 Aluminum Alloy by Mechanical Milling and Hot Extrusion
D. C. Mendoza-Ruiz, I. Estrada-Guel, P. Ferreira, J. González-Hernández, M. Miki-Yoshida, R. Martínez-Sánchez

Comparative Study in Al-Ni-Mo Alloys Obtained by Mechanical Alloying in Different High Energy Ball Mills
M. I. Flores-Zamora, I. Estrada-Guel, J. I. Barajas-Villaruel, P. G. Ramírez-Cano, R. Martínez-Sánchez

The Characterization of Ni₇₀Mo₁₀C₁₀Fe₇Cr₃ Alloys Obtained By Mechanosynthesis
L. Diaz-Barriga, B. Zeifert, V. López, L. Bucio, E. Palacios, F. Leyte, V. Garibay, P. del Angel Vicente

A detailed study of amorphization reactions by ball milling 
G. González, A. Sagarzazu, L. D'Angelo, R. Villalba, D. Bonyuet

Mechanochemical transformation of calcium phosphates with different Ca/P ratios
J. Salas, G. Gonzalez, Z. Benzo

Effect of Cr additions on FeCo obtained by mechanical alloying
G. Gonzalez, D. Oleszak, A. Sagarzazu, R. Villalba, L. D'Onofrio

Synthesis And Characterization of the Co_xNi_xAg_100-2x and (CoNi)_xAg_100-x Ternary Systems Mechanically Alloyed
D. Bonyuet, G. González, J. Ochoa

Structure transformations in rapidly quenched and ball milled FeCoSiBNb alloy
N. B. Dyakonova, E. N. Vlasova, I. V. Lyasotsky, D. L. Dyakonov

Characterization of nanostructured aluminium alloys prepared by ball milling
M. Hüller, M. Göken

Mechanochemistry of Orthophosphates: A new copper apatite and Xenotime-type compounds 
I. Rosales, L. Bucio, E. Orozco, C. R. Magana

Investigation of the structure, microstructure and thermal kinetics of Cu_45+xTi_55-x system prepared by mechanical alloying
M. S. Al-Assiri, A. Alolah, A. Al-Hajry, M. Bououdina

Mechanosynthesis of Nanocrystalline Cu with Al₂O₃ dispersion by Cryogenic milling
S. J. Hwang, J.-H. Lee, J.-H. Ahn

Mechanical Properties of Fe-Cr-Al-Si ODS stainless steels
J.-H Ahn, S. Lee, H. Shin, S. J. Hwang, J. Jang

Influence of milling conditions on mechanical alloying of Fe-B powders
T. A. Sviridova, E. V. Shelekhov, N. P. Dyakonova, V. V. Molokanov

Characterization of the FeAl intermetallic compound obtained by mechanical alloying and sintered 
L. D Angelo, G. Gonzalez, L. D'Onofrio

Mössbauer study of phase transformations in hematite induced by electric discharge assisted mechanical milling
E. Jartych, A. Calka

Ti-hydroxyapatite nanocomposite materials
K. Niespodziana, K. Jurczyk, M. Jurczyk

Nanoscale hydrogen storage materials studied by TEM
M. Makowiecka, L. Kępiński, M. Jurczyk

Hydrogen storage by Mg-based nanomaterials
I. Okonska, W. Iwasieczko, H. Drulis, M. Jurczyk

Raney-Nickel Catalysts Produced by Mechanical Alloying
B. Zeifert, J. Salmones Blasquez, J. G. Cabanas Moreno, H. A. Calderón

Electrochemical properties of amorphous and nanocrystalline Co₇₇Si_11.5B_11.5 alloy
R. Nowosielski, A. Zajdel, A. Baron, B. Kostrubiec

Oxidation of Ni₆₀Zr₃₀Ti₁₀ and Cu₆₀Zr₃₀Ti₁₀ metallic glasses
U. Köster, M. Meuris

Electrochemical Behavior of a Fe₄₈Cr₁₅Mo₁₄Er₂C₁₅B₆ Bulk-Metallic Glass 
D. C. Qiao, B. Green, P. K. Liaw, S. J. Poon, R. A. Buchanan

In situ high temperature XRD studies of the crystallization of the melt-spun Mg₆₃Y₇Ni₃₀ alloy and the Mg₆Ni phase under hydrogen
A. Teresiak, A. Gebert, M. Uhlemann 

The H-sorption Behaviour of Ball-Milled MgH₂ - 5 mol.% FeF₃ studied by In-situ Small Angle Neutron Scattering
S. Deledda, M. Vennström, A. Borissova, A. R. Yavari, G. Fragneto

Mechanochemical Synthesis and H-desorption Behavior of Mg-based Nanocomposites
D. R. Leiva, J. F. Ribeiro de Castro, J. Saida, A. Moreira Jorge Junior, T. Toshimi Ishikawa, W. J. Botta Filho

Atomised Nanostructured Al-Fe-Cr-Based Alloys
F. Audebert, M. Galano, C. Triveno Rios, A. H. Kasama, C. Bolfarini, C. S. Kiminami, W. J. Botta Filho

Quasicrystal Decomposition in Nanoquasicrystalline Al-Based Alloys
M. Galano, F. Audebert, B. Cantor, I. C. Stone

Investigation of the critical properties of the models with double-exchange interaction by the Monte Carlo method
M. A. Magomedov

Atomic order dynamics and surface effects in FePt L₁₀ nanolayers by Monte Carlo simulations 
M. Kozłowski, R. Kozubski, V. Pierron-Bohnes, W. Pfeiler

Nano-scale structures on the base of sigma and alpha-Mn type metastable phases in glass forming iron base alloys
I. V. Lyasotsky, N. B. Dyakonova, D. L. Dyakonov

Metastable phases and nanostructuring of Fe-Nb-Si-B base rapidly quenched alloys
I. V. Lyasotsky, N. B. Dyakonova, D. L. Dyakonov, E. N. Vlasova, M. Yu. Jazvitsky

Nanocrystalline incommensurate structures in Ti-TM alloys
N. B. Dyakonova, I. V. Lyasotsky, G. I. Nosova

Mechanochemical synthesis of silver vanadate and silver chromate amorphous superionic conductors
J. L. Nowiński, P. Pineda Vadillo, J. E. Garbarczyk, M. Wasiucionek, G. Z. Żukowska, S. Gierlotka

The Effect of Heat Treatment on the Thermo-Mechanical Behavior in Some Blended Cement Paste
A. E. Al-Salami, M. S. Al-Assiri, A. Al-Hajry, M. A. Ahmed, S. Taha

Endeavor to Industrialization of Bulk Metallic Glasses for Innovative Applications 
A. Tejima, N. Nishiyama, A. Inoue

If you find an error in the above list, can not find your poster or wish to withdraw the poster from the list, please contact the organisers.

Posters will be affixed to the hard plastic boards with the single sided or double sided Scotch tape. No pins may be used! The size of the posters should not exceed 90 cm in width and 150 cm in height.

The posters should be mounted not later than the beginning of the first Monday coffee break, i.e. 10:30. The boards will be accessible from Sunday, 15:00.

Page updated on 24^th August 2006, 18:00.